Built for Falcon stunt riders — wheelies, stoppies, drifts and the rear brake abused all day. Two genuine Ultra Bee calipers, one rotor, independent control — hand lever on one, foot brake on the other.
Why two calipers
- Foot-controlled rear brake. Pair it with the 79Bike Falcon Foot Brake Kit: your foot locks the rear for stoppies, drifts and wheelie control while both hands stay on the bars and the clutch.
- Twice the pad area, half the heat per caliper. Long stunt sessions cook a single rear caliper. Two share the load, so the lever stays firm and the pads last.
- Genuine Sur-Ron Ultra Bee calipers — not copies. Same forged 2-piston calipers Sur-Ron fits to its own bikes. The copy calipers flooding the market flex, leak and fade; these do not.
Key specs
| Calipers | 1 or 2 genuine Sur-Ron Ultra Bee 2-piston (choose below) |
| Master cylinder | Genuine Sur-Ron Ultra Bee (hand lever); second caliper is driven by the EBG Foot Brake Kit master cylinder |
| Rotor | 220 or 230 mm floating · 3.5 mm · cooling grooves · 420J2 stainless, heat treated · V2.1 or V3.0 pattern |
| Pads | Semi-metallic, genuine Sur-Ron |
| Line | Steel-braided, PTFE core, DOT4 |
| Bracket | CNC billet 7075 dual bracket, anodised, 5 colours |
| Stock 79Bike Falcon | 203 / 220 mm fixed rotor, single caliper — this kit gives up to 30% more stopping power on the hand lever alone, plus a second, independent brake |
Which option?
Pick by what you already have:
- Rear Brake Kit Dual Caliper + 1 Ultra Bee Caliper + Rotor V3.0 / V2.1 — everything: dual bracket, two calipers, master cylinder, pads, line and rotor. Our most-ordered option. ($449)
- Rear Brake Kit Dual Caliper + 1 Ultra Bee Caliper — the full two-caliper kit, keep your own 220 / 230 mm rotor. ($349)
- Rear Brake Kit Dual Caliper — one caliper, master cylinder, pads, line and dual bracket; add the second caliper later. ($284)
- Dual Caliper Brake Bracket + 1 Ultra Bee Caliper — already run an EBG rear kit? Add the dual bracket and a second genuine caliper. ($219)
- Dual Caliper Brake Bracket Only — just the CNC dual bracket, anodised in your colour. ($129)
Move your mouse over a colour above and the photo switches to that finish.
Fits
Falcon M · Falcon Pro · Falcon GT — M6x54mm. Uses the factory mounting points — no drilling, no adapters. Some frames need 0.5–1.5 mm shim washers behind the caliper for dead-centre alignment.
Installation guide: watch the setup video. Bleed both circuits after fitting.
Keep pads and rotor free from chain lube and brake fluid — contamination causes noise and is not covered by warranty.
Unsure which one you need? Leave a note at checkout and we will check it before shipping.










































Reviews
There are no reviews yet